Need Appliance Repair Service? Have a general question?
We love solving problems! Let us know how we can help by reaching out below.


How can we help?

Local Reviews
for Kenedy, TX

ApplianceCare Rated 5.0 out of 5 stars based on 2 customer reviews

Map of Kenedy, TX

Conrad




Review of ApplianceCare

Great Service


Response from ApplianceCare:

Thank you for writing a review!


Map of Kenedy, TX

Ice Maker




Review of ApplianceCare

I am pleased that Appliance Care have Great and Wonderful people working, I met Michael and he is an Awesome Guy, he has a lot of experience and I am very Satisfied with his performance. Appliance Care, take care of their customers.. Thank U Michael


Response from ApplianceCare:

Thank you for writing a review for us. We are pleased to hear that your experience with us was a positive one and that Michael was able to fix the problem efficiently.


Michael R.

Michael R.

REFRIGERATOR KITCHENAID KRMF706ESS00 "Installed main control and deli control, plugged appliance in and the lights were out in the appliance and the control didn’t light up or allow any selections, unplugged the deli control and the lights came back on. Called and spoke with Leon at whirlpool tech line SR7728823257 to ask if the issue would be the harness, he asked if the fans were running and lights on, yes. He said to replace both the control and harness at the same time, did not install the deli control. Discussed it with customer, doesn’t want to spend anymore money at this time. The evaporator fans, ice maker fan and lights are working normal, compressor is running and appliance is cooling properly"

Near FM 2509, Kenedy, TX 78119
Michael R.

Michael R.

WASHER MAYTAG MVWB835DW4 "F8E1, F3E2, F2E1, cleared error codes, tested inlet valve, neither side is opening up, installed new inlet valve, calibrated and performed a diagnostics test, completed with no issues or error codes, the inlet valve and appliance are working normal"

Near County Rd 330, Kenedy, TX 78119
Michael R.

Michael R.

WASHER WHIRLPOOL WTW5000DW2 "The appliance doesn’t fill per customer when on bulky sheets. . No error codes, tested inlet valve, spin cycle and agitation cycles on manual, all working normal. Calibrated and performed a diagnostics test, completed with no issues or error codes. Turned the appliance on bulky items and started it, it’s filling with water, appliance is working normal"

Near FM743, Kenedy, TX 78119
Michael R.

Michael R.

WASHER WHIRLPOOL WTW5000DW2 "Installed part ordered, when took the gearcase out I found there was a mouse nest inside the gearcase which was not allowing it to sense the speed of the basket and shut off. Calibrated and performed a diagnostics test, completed with no issues or error codes, appliance is working normal"

Near TX-239, Kenedy, TX 78119
Michael R.

Michael R.

WASHER WHIRLPOOL WTW5000DW2 "The appliance would shut off when it would go into spin. Error code F7E1, cleared error code and put into diagnostics, it shut down and unlock before the spin cycle completed or the basket come to a stop, everything is working normal on manual test, Including tachometer, went ahead and changed out the actuator from truck stock, still doing the same thing. Called and spoke with Bruce at whirlpool tech line, got disconnected, called back and spoke with Kathy SR 7727510429 at whirlpool tech line and explained all I’d done, she had me run an automatic test, the appliance shut down and unlocked before the spin cycle completed, said there could be something mechanically wrong with gearcase due to clothing caught up in the pulley and cam assembly, it’s not recognizing the basket is still spinning.; ordrng 1 W11035751 (gearcase)"

Near TX-239, Kenedy, TX 78119
Michael R.

Michael R.

WASHER MAYTAG MVWB765FW0 "F3E2, F5E4,F8E6, cleared error codes, tested inlet valve, it’s leaking by on the cold side. Removed inlet valve and replaced it with a new one. Quoted customer for SCF, P&L. Collected"

Near County Rd 129, Kenedy, TX 78119
Michael R.

Michael R.

WASHER WHIRLPOOL WTW5000DW2 "F2E1, F0E2, F7E1, cleared error codes and the calibrated the wash plate was slipping when it was trying to grab the basket. Removed wash plate and HUB, both are in good w,€condition. Unplugged the appliance and looked underneath, there was a piece of material caught between the clutch and pulley, installed cam assembly from truck stock. Calibrated and performed a diagnostics test the appliance would shut off and unlock before it stopped spinning, replaced control, the appliance is working normal.; used 1 W10721967 (CAM) from stock"

Near TX-239, Kenedy, TX 78119
Michael R.

Michael R.

WASHER WHIRLPOOL CAE2745FQ0 "Installed lid lock, calibrated and performed a diagnostics test, the lid lock and appliance are working normal"

Near TX-72, Kenedy, TX 78119
Michael R.

Michael R.

WASHER WHIRLPOOL CAE2745FQ0 "F8E6, F5E1, F5E2, cleared error code, and manually tested the inlet valve, it’s working normal, tested lid lock, test failed, tachometer test past. Ordered lid lock and rescheduled control and actuator just in case.; ordrng 1 WPW10482836 (latch)"

Near TX-72, Kenedy, TX 78119
Michael R.

Michael R.

MICROWAVE WHIRLPOOL WMH31017HS2 "Removed microwave and Installed parts ordered, put microwave back in place and ran the microwave for 6 minutes. The appliance didn’t didn’t cut off or blow the breaker."

Near TX-72, Kenedy, TX 78119
Michael R.

Michael R.

WASHER MAYTAG MHW5500FW1 "F9E1,F3E1,cleared error codes, called partner team and spoke with Tenisha for authorization on parts, MP76CP7DP1. Said the SCF and labor would be covered on the prior 90 days. Installed parts ordered, confirmed no blockage on air trap. Performed a diagnostics test, completed with no issues"

Near Business Park Dr, Kenedy, TX 78119
Michael R.

Michael R.

WASHER MAYTAG MHW5500FW1 "F9E1, F3E1, cleared error codes. Removed top and back panel and checked all connections, no kinks or punctures in the pressure hose. Removed the the filter and sucked up access water with shop vac, found the filter clogged up with paper, chain and other stuff, removed and clean filter with water. Put filter and panels back in place, balanced the appliance and performed a diagnostics test, completed with no issues or error codes."

Near Business Park Dr, Kenedy, TX 78119
Michael R.

Michael R.

WASHER MAYTAG MHW5500FW1 "F9E1, F3E1, cleared error codes. Removed top and back panel and checked all connections, no kinks or punctures in the pressure hose. Removed the the filter and sucked up access water with shop vac, found the filter clogged up with paper, chain and other stuff, removed and clean filter with water. Put filter and panels back in place, balanced the appliance and performed a diagnostics test, completed with no issues or error codes."

Near Business Park Dr, Kenedy, TX 78119
Michael R.

Michael R.

DRYER WHIRLPOOL WED4815EW1 "The timer was damaged, knob was good. Installed part ordered, no further issues"

Near County Rd 127, Kenedy, TX 78119
Michael R.

Michael R.

WASHER WHIRLPOOL WTW4850HW1 "F8E1 error code, cleared error code, the cold side of inlet valve wasn’t opening up. Installed inlet valve from truck stock part number W11038689"

Near County Rd 326, Kenedy, TX 78119
Michael R.

Michael R.

WASHER MAYTAG MHW5500FW1 "F9O1, F301, F5E1, F8E1, cleared error codes. The door wouldn’t latch, striker was loose, tighten latch, still wouldn’t latch. The door seemed to have been forced opened damaging the latch, replaced with new one and ran a diagnostics test, completed with no issues or error codes. The lid lock and appliance are working normal"

Near Business Park Dr, Kenedy, TX 78119
Michael R.

Michael R.

WASHER WHIRLPOOL CAE2793BQ0 "The appliance isn’t washing and the water stays in tub and doesn’t drain. The appliance wouldn’t go into diagnostics, the start button was real loose. Removed the console and found the tab on the control for the start button is broken, all connections were good, display isn’t responding to enter diagnostics, needs new control and start button. Quoted customer for SCF, P&L, the customer didn’t want to go through with it, paidfor SCF"

Near Business Park Dr, Kenedy, TX 78119
Michael R.

Michael R.

WASHER AMANA NTW4516FW3 "Installed new control, appliance powered on, calibrated and performed a diagnostics test, completed with no issues or error codes, appliance is working normal"

Near N Sunset Strip St, Kenedy, TX 78119
Michael R.

Michael R.

WASHER AMANA NTW4516FW3 "The appliance wouldn’t power on or allow me to get into diagnostics. Removed the console and checked connections the green light was not lit on the control, unplugged the appliance and checked voltage, all checked out, plugged appliance back in and the control board wouldn’t power up, ordered control to resolve the issue ; ordrng 1 W11170317 (cntrl-elec)"

Near N Sunset Strip St, Kenedy, TX 78119
Michael R.

Michael R.

DRYER MAYTAG MEDB835DW4 "The drum wouldn’t spin, removed the front panel, belt,idler and motor are good. Removed the cover to the blower and found a sock caught inside the blower wheel, removed sock and put appliance back together, appliance is spinning and working normal."

Near County Rd 341, Kenedy, TX 78119
Michael R.

Michael R.

WASHER MAYTAG MVWB835DW1 "Installed part ordered, calibrated and performed a diagnostics test, completed with no error codes, the appliance is is working normal"

Near S 9th St, Kenedy, TX 78119
Michael R.

Michael R.

REFRIGERATOR MAYTAG MFF2258VEW6 "Installed part ordered, tested the ice maker, it’s calling for water and working normal"

Near FM 2102, Kenedy, TX 78119
Michael R.

Michael R.

WASHER MAYTAG MVWB835DW1 "Error code F0E5, cleared error code, calibrated and performed a diagnostics test, the gearcase bearings are bad ,ordered part to resolve issue ; ordrng 1 W10811956 (drum assy)"

Near S 9th St, Kenedy, TX 78119
Michael R.

Michael R.

WASHER WHIRLPOOL WTW8240YW0 "Found error code F71, performed an automatic diagnostics and it wouldn’t go into spin mode. Ran a manual test to check the RPS sensor, also the spin test motor all checks out. Ran 2nd automatic test and it completed with no issues. During the manual spin test is was loud and when it was coming to a stop you could hear the bearings were bad. I was unable to remove the wash plate, ordered parts to resolve issue. ; rqstng P&A on 1 W10381078 (outer tub) and 1 W10549509 (basket) and 1 WPW10380698 (washplate)"

Near FM 2443 Rd, Kenedy, TX 78119
Michael R.

Michael R.

REFRIGERATOR MAYTAG MFF2258VEW6 "The Was smelling a burnt smell in the freezer and had unplugged the appliance, took back panel off to compressor to check the relay/compressor, all checked out, vacuumed out dust bunnies from underneath /condenser. Removed the ice maker and found the plastic was burned underneath where the heater is. Ordered ice maker to resolve issue, plugged the appliance back in, the appliance is working normal ; ordrng 1 W10884390 (icemaker) and 1 WPW10458985 (harns-wire)"

Near FM 2102, Kenedy, TX 78119