Need Appliance Repair Service? Have a general question?
We love solving problems! Let us know how we can help by reaching out below.


Local Reviews
for Inez, TX

ApplianceCare Rated 5.0 out of 5 stars based on 4 customer reviews

Map of Inez, TX

Quick & Efficient




Review of ApplianceCare

Thanks for the service work on our dryer! Work was done quickly and professionally, tech was polite and cleaned up when he was done.


Response from ApplianceCare:

Thank you for the review!


Map of Inez, TX

Great service




Review of ApplianceCare


Response from ApplianceCare:

Thank you!


Map of Inez, TX

Great Service!




Review of ApplianceCare

Great service!!


Response from ApplianceCare:

Thank you for writing a review!


Map of Inez, TX

Great job !




Review of ApplianceCare

Repairs done ASAP with no “run around”.... great experience!


Response from ApplianceCare:

Thank you for writing a review for us.


Michael R.

Michael R.

WASHER MAYTAG MHW5500FC0 "Installed new control, ran a quick wash diagnostics test, on completion the door lock light stayed flashing and drain pump continued to stay activated, unplugged the appliance and plugged it back in, there were no error codes. Removed the back panel, removed the air trap assembly, it was completely clogged, cleaned it out real well with water, no obstruction in the pressure hose, put air trap assembly and panel back in place. Ran a quick wash diagnostics test again, completed with no issues or error codes, the door unlocked and appliance is working normal"

Near Post Oak Bend, Inez, TX 77968
Michael R.

Michael R.

REFRIGERATOR KITCHEN AID KRFC300ESS03 "Rust spots on the door per customer. I advised the customer it’s past the 30 day cosmetic window. Called and spoke with TJ at Whirlpool tech line SR7729718868. He advised of 30 days and to make sure the customer isn’t using any ammonia products like windex, recommended the customer use these products W10252111, surface brightener, 31625 fiber cloth, if this doesn’t work for them they would need to call Whirlpool customer service."

Near Benbow Rd, Inez, TX 77968
Michael R.

Michael R.

DISHWASHER WHIRLPOOL WDF330PAHB2 "Doesn’t do anything per customer. F3E3, found the drain line was clogged up, cleared obstruction, water valve was off on arrival, turned water on, attempted diagnostics, filled with water, motor kicks on but sounds like it’s stuck, confirmed it needs the motor assembly; O-emld tckt"

Near Bumpy Rd, Inez, TX 77968
Michael R.

Michael R.

WASHER MAYTAG MVWB835DW0 "Installed the part, F2E3, UI mismatch. Correct part number on the box wrong part in the box, please reschedule the customer when the part comes in ; ordrng 1 W10861510 (console)"

Near Post Oak Jct, Inez, TX 77968
Michael R.

Michael R.

WASHER WHIRLPOOL WTW6120HC0 "F0E2 error code on display per customer. The was on the display on arrival after a wash cycle had just completed, said she uses load and go. Went into diagnostics, F0E2, F7E7 error codes, cleared error codes, unplugged the appliance for 60 seconds, plugged it back in to reset the control, calibrated and ran diagnostics, completed with no issues or error codes, activated the spin cycle manually, it is getting up to speed, fault history is clear, the appliance is working normal."

Near Inez, TX 77968
Michael R.

Michael R.

WASHER MAYTAG MHW5500FC0 "Not unlocking after the wash cycle, door lock stays flashing. F5E2 error code, cleared error code, at the end of the cycle door lock stayed flashing and wouldn’t unlock. Turned the breaker off and turned back on after 60 seconds the drain pump stopped and unlocked the door, removed the top panel, connections are good at the locking devise and the control. When I opened the door it felt loose, tightened the screws at the hinge. Performed another quick wash diagnostics test completed with no issues or error codes. Ran a drain and spin cycle to confirm the door would unlock at the end of the cycle, it shows done and it didn’t unlock, the drain pump kicked on and door flashing. Installed new control, the appliance shut down after step 7 door lock flashing and drain pump kicked on again. Called tech line and spoke with Steve, advised all I’d done and what it’s doing, he said I should be getting error codes, none, said to replace control again, SR7729552104; rqstng

Near Post Oak Bend, Inez, TX 77968
Michael R.

Michael R.

WASHER WHIRLPOOL WTW6120HC0 "Installed parts ordered, calibrated and performed a diagnostics test, completed with no issues or error codes, the appliance is working normal."

Near Inez, TX 77968
Michael R.

Michael R.

WASHER MAYTAG MVWB835DW0 "Won’t power on per customers. F6E2 error code, cleared error code and tried to go into diagnostics, wouldn’t allow me any selections and error code popped back up, need to order the console and reschedule the customer when the part comes in; O-emld tckt"

Near Post Oak Jct, Inez, TX 77968
Michael R.

Michael R.

DRYER WHIRLPOOL WED8500DC4 "Making a screeching noise, removed the front panel, 2 of the wheels and the I’d,Sr were starting to lock up, installed a dryer kit, tested the appliance, it’s longer making the noise, put the appliance back together, plugged the appliance in and tested it again, the appliance is no longer making the noise and working normal ; used 1 4392067 (DRYER KIT) from stock"

Near Kimber Lane, Inez, TX 77968
Michael R.

Michael R.

REFRIGERATOR WHIRLPOOL WRS325SDHB04 "Install parts ordered, the fan is working normal, still not getter water to the dispense. Called and spoke with Andy, checked for kinks at the door, and not getting water at the door, said to look at the reservoirs, it was froze due to the air not circulating and the customers lowering temperatures to keep it cool. SR 772888420, lowered temperatures and with fan working it will circulate the air which should prevent this from happening again. The customer said she would unplug it to defrost the line. The appliance is cooling and working normal"

Near Bumpy Rd, Inez, TX 77968
Michael R.

Michael R.

DRYER WHIRLPOOL WED7120HC0 "Making loud noise per customer, found the right side of the cabinet was pushed in causing the drum to rub, removed the top and front panel and popped it out, ran the appliance m no longer making the noise.put the panels back on, F2E1 error code, there is no stuck keys, the appliance is no longer making the noise and working normal"

Near Nickel Rd, Inez, TX 77968
Michael R.

Michael R.

REFRIGERATOR WHIRLPOOL WRS325SDHB04 "The appliance is cooling but not dispensing water or making ice. Temperatures were 30 degrees in the FC and 48 degrees in the RC, the fan isn’t blowing, checked water dispenser, not dispensing water but the inlet valve is engaging, tested ice maker, it is rotating and calling for water. Ordered evaporator fan and inlet valve.; ordrng 1 WP2315549 (evap fan motor) and 1 WPW10179146 (valve-inlt)"

Near Bumpy Rd, Inez, TX 77968
Michael R.

Michael R.

DRYER MAYTAG MEDB855DC "The dryer was making a screeching noise. Removed the front panel and drum, the idler pulley was froze up. Installed dryer kit from truck stock, put appliance back together, it’s no longer making the screeching noise and working normal.; used 1 4392067 (DRYER KIT) from stock"

Near Inez, TX 77968
Michael R.

Michael R.

DISHWASHER MAYTAG MDB8959SFZ "The start button wasn’t working properly, had to push hard for it to come on. Installed control panel, the buttons and appliance are working normal"

Near Live Oak Dr, Inez, TX 77968
Michael R.

Michael R.

WASHER MAYTAG MVWB855DC3 "Installed new drum assembly, calibrated and performed a diagnostics test, completed with no issues or error codes, the appliance is working normal"

Near Inez, TX 77968
Michael R.

Michael R.

WASHER MAYTAG MVWB835DW0 "Installed part ordered, calibrated and performed a diagnostics test, completed with no error codes. The inlet valve and appliance are working normal"

Near Rodeo Rd, Inez, TX 77968
Michael R.

Michael R.

WASHER MAYTAG MVWB835DW0 "Error codes F3E2, F8E1, F0E5, F5E2, cleared errors codes and tested the inlet valve, the valve wouldn’t open up on both cold or hot, ordered inlet valve.; ordrng 1 W11165546 (valve)"

Near Rodeo Rd, Inez, TX 77968
John L.

John L.

REFRIGERATOR WHIRLPOOL WRF990SLAM03 "Installed evaporator, charged unit. No longer pulling vacuum, Freon pressure now within normal range. Issue should be resolved."

Near FM1686, Inez, TX 77968
Michael R.

Michael R.

WASHER MAYTAG MVWB835DW0 "Error code F7E8, F7E5, F0E5, F7E0, cleared error codes was unable to run diagnostics, the gearcase is shot, oil all underneath the appliance. Ordered parts to resolve issue ; ordrng 1 W10754158 (motor stator) and 1 W10754161 (motor rotor) and 1 W10754448 (clutch) and 1 W10811956 (drum assy) and 1 W11165546 (valve)"

Near Rodeo Rd, Inez, TX 77968