Need Appliance Repair Service? Have a general question?
We love solving problems! Let us know how we can help by reaching out below.
Local Reviews
for Greenbrier, AR
Powered by Fluid LOCALVery professional appt.
Debbie - Greenbrier, AR
Jeff was very professional. He was courteous and polite. He checked the machine out thoroughly and explained what he was doing and demonstrated “how to” do things. He even protected my wood floor before moving the machine.
Response from ApplianceCare:
Thank you for the review.
Great
Harry - Greenbrier, AR
Friendly, good explanation of the problem, and good advice on how to use these new appliances.
Response from ApplianceCare:
Thank you very much for the review. We appreciate it.
Jeff N.
WASHER WHIRLPOOL WTW5000DW3 No error codes. Ran diagnostics checked good. Called tech support to check about lid lock not locking in agitator mode. It does not lock until in spin cycle.
Jeff N.
LAUNDRY MAYTAG MVW7230HW0 Installed door latch. Checks good
Doug M.
LAUNDRY MAYTAG MVWB865GC0 "Inspected for white residue on clothing, performed service diagnostics found no error codes, performed manual test all steps checked ok,found customer overloading and using too much detergent,informed customer to cut down on load size and detergent,found dispenser not staying closed when filling,diagnosed to need dispenser,; ordrng 1 W11397976 (DISPENSER )"
Doug M.
REFRIGERATOR WHIRLPOOL WRT318FZDB02 "Replaced compressor due to shorted start windings,tested unit operation checks ok"
Doug M.
29'' WHIRLPOOL WRS588FIHV00 "Replaced icemaker due to crack in tray causing ice jam , tested unit operation checks ok"
Doug M.
ICEMAKER WHIRLPOOL GI1500XHW4 "Inspected unit for not making ice ran test cycle found water not cascading over evaporator plate, found water tube disconnected,reset water tube,ran test cycle found ice forming on evaporator plate,cleaned coils,operation checks ok"
Doug M.
ICEMAKER WHIRLPOOL GI1500XHW4 "Inspected unit for not making ice ran test cycle found water not cascading over evaporator plate, found water tube disconnected,reset water tube,ran test cycle found ice forming on evaporator plate,cleaned coils,operation checks ok"
Doug M.
WASHER MAYTAG MVWC465HW2 "Inspected unit for banging noise,performed service diagnostics found no error codes, performed manual test all steps checked,customer explained banging happened when she had a towel in with jeans and shirts,explained to customer on these units to wash like clothing together to help with unbalanced issue,verified normal operation, unit checks ok"