Appliance Repair Schertz Texas

ApplianceCare Rated 4.7 out of 5 stars based on 43 customer reviews

MAYTAG RANGE

Model MER8800FZ1
Near Schertz, TX 78154

Job Details:
01/11/2023

Upon arrival customer stated units stove elements and oven did not work. Removed unit from the cavity and checked incoming power form the wall and unit. L1-n 120 volts. L2-n 13.1volts. L1-L2 87.5 volts. The issue is the unit is not getting enough power to turn on the elements or oven. Ferried a faulty wall outlet. Advised customer to get an electrician to replace the outlet. No further issues at this point.

WHIRLPOOL DISHWASHER

Model WDT920SADM3
Near Schertz, TX 78154

Job Details:
01/10/2023

Upon arrival customer stated a knife fell onto the dishwasher heater melting causing issues. Verified issue and replaced faulty heater with new. Reinstalled unit into cavity. Tested unit and u it functions as designed. No further issues at this point.

SAMSUNG REFRIGERATOR

Model RF24FSEDBSR/AA
Near Schertz, TX 78108

Job Details:
01/09/2023

Checked refrigerator, issue is ice maker getting blocked up. Ordering ice maker assembly to resolve issue. OTL authorization needed. ; ordrng 1 DA82-02668A (Ice maker assembly)

Zachary

WHIRLPOOL REFRIGERATOR

Model WRS588FIHZ00
Near Schertz, TX 78154

Job Details:
01/05/2023

Upon arrival customer stated unit stopped cooling the freezer then rc. Checked unit in diagnostic mode and found the compressor was not kicking on. Removed back panel. Found 120 volts incoming and 3.5 volts dc. Inverter box checks good. Checked compressor for resistance. Got 12.2 volts on one leg and 0 volts on the other indicating a bad compressor. Ordering 1 W10780378 compressor, W11117259 suction tube, 2325479 process tube to resolve issues. ; ordrng 1 W10780378 (Compressor) and 2 W11117259 (Suction tube)s and 2 2325479 (Process tube)s

MAYTAG DRYER

Model MEDB765FW0
Near Schertz, TX 78154

Job Details:
01/04/2023

Upon arrival customer stated unit would not dry past 5 minutes on every cycle minus timed. Removed bottom panel after ohming out the temp sensor. Verified an open line. Noticed harness was not connected. Reconnected harness and tested unit. Customer also stated door would not close. Replaced strike and catch. Adjusted door as well. Door now closes. Unit functions as designed. No further issues at this point.

Sasha

Schertz, Texas

 5/5

3009

Schertz, Texas

Multiple attempts have been made to diagnose my microwave. This last attempt stated that the microwave was on a GFCI breaker and we should switch to non GFCI. When eletricians came out they confirmed that the breaker was non GFCI to begin with. I need a working microwave!

 1/5

Justin

Schertz, Texas

I wasn’t home for the recall installation but my gf was and I don’t appreciate being charged for a free service. I Then had to call to get that straightened out. I’m really hoping this was a misunderstanding and not some predatory practice to try to overcharge people. Other than that, as far as I can tell.. the repair was done well and have no complaints on the work

 3/5

Jvasta

Schertz, Texas

 5/5

Janet Walker

Schertz, Texas

Great service, very friendly and took time to answer all my questions!

 5/5