Appliance Repair Refugio Texas

ApplianceCare Rated out of 5 stars based on 0 customer reviews

We serviced a
WHIRLPOOL WASHER
Model WTW4616FW2
Near Refugio, TX 78377
Jim
Job Details: 06/14/2021
"Customer states that washer is not cycling properly. Check codes, F8E1 ( no fill/ long fill), F7E5 (shifter fault).Spoke to Andrew from TechLine (SR7730981144). After numerous checks in automatic mode, Andrew recommended replacing the shifter. Please reschedule when parts arrive.; rqstng P&A on 1 W10913953 (Shifter)"
We serviced a
WHIRLPOOL RANGE
Model WFG320M0BW2
Near Refugio, TX 78377
John L.
Job Details: 03/22/2021
"Inspected unit, could not detect any signs of gas throughout unit. Unit does not appear to have any issues at this moment."
We serviced a
KITCHENAID MICROWAVE
Model KOCE500ESS09
Near Refugio, TX 78377
John L.
Job Details: 03/22/2021
"Inspected unit, found issue to be with interlocks. Will need to replace to resolve issues.; ordrng 1 W11356969 (Interlock) and 2 WB01T10026 (door pad)s"
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW2
Near Refugio, TX 78377
John L.
Job Details: 03/15/2021
"F2 E3 switch mismatch, F8E3 overflow, F8E1 long fill, F7E5 shifter fault. Replace shifter, the other issue still remains. Unit does not allow re-calibration as there is an issue with the control board. Will need to replace control board valves and switches to resolve issues.; ordrng 1 W10869799 (valve) and 1 W10285518 (Switch) and 1 W10285511 (switch-cyc) and 2 W10285512 (switch-cyc)s"
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW2
Near Refugio, TX 78377
Michael
Job Details: 03/08/2021
"Won’t do anything per customer. F7E1, F0E2, F1E1 control fault. Installed the new control it shuts off as soon as I push the start button to calibrate, wouldn’t allow me to calibrate, started a diagnostics test, wouldn’t stop filling, defective part. Put the old control back in, calibrated and performed a diagnostics, not agitating properly, installed new actuator, calibrated and performed a diagnostics test, completed with no error codes, the spin cycle is very loud, signs of oil leak, bad gearcase, ordered parts to resolve issue, also ordered the control due to the fault code. Please reschedule the customer when the all parts come in.; rqstng P&A on 1 W10721967 (drive pulley) and 1 W11101101 (cntrl-elec) and 1 W11454741 (GEARCASE ) and 1 WPW10006384 (drive belt) and 1 WPW10427633 (pulley shield)"